Accessories
-
Multi-Parameter Joint Water Sampler
The FS-CS series Multi-parameter Joint water sampler was independently developed by Frankstar Technology Group PTE LTD. Its releaser applies the principle of electromagnetic induction and can set a variety of parameters (time, temperature, salinity, depth, etc.) for programmed water sampling to achieve layered seawater sampling, which has high practicability and reliability.
-
Portable Manual Winch
Technical Parameters Weight: 75kg Working load: 100kg Flexible length of lifting arm: 1000~1500mm Supporting wire rope: φ6mm，100m Material: 316 stainless steel Rotatable angle of lifting arm:360° Feature It rotates 360°, can be fixed portable, can switch to neutral, so that the carrying falls freely, and it is equipped with a belt brake, which can control the speed during the free release process. The main body is made of 316 stainless steel corrosion-resistant material, matched with 316 sta... -
FS – Circular Rubber Connector
The circular rubber connector designed by Frankstar Technology is a series of underwater pluggable electrical connectors. This type of connector is widely regarded as a reliable and robust connectivity solution for underwater and harsh marine applications. This connector is available in four different size enclosures with a maximum of 16 contacts. The operating voltage is from 300V to 600V, and the operating current is from 5Amp to 15Amp. Working water depth up to 7000m. Standard connectors ... -
360 Degree Rotation Mini Electric Winch
Technical parameter
Weight: 100kg
Working load: 100kg
Telescopic size of lifting arm: 1000~1500mm
Supporting wire rope: φ6mm,100m
Rotatable angle of lifting arm : 360 degrees
-
Dyneema rope/High strength/High modulus/Low density
Introduction
Dyneema Rope is made of Dyneema high-strength polyethylene fiber, and then made into a super sleek and sensitive rope by the use of thread reinforcement technology.
A lubricating factor is added to the surface of the rope body, which improves the coating on the surface of the rope. The smooth coating makes the rope durable, durable in color, and prevents wear and fading.
-
Kevlar rope/Ultra-high strength/Lower elongation/Resistant to aging
Introduction
The Kevlar rope used for mooring is a kind of composite rope, which is braided from arrayan core material with low helix angle, and the outer layer is tightly braided by extremely fine polyamide fiber, which has high abrasion resistance, to obtain the greatest strength-to-weight ratio.
Kevlar is an aramid; aramids are a class of heat-resistant, durable synthetic fibers. These qualities of strength and heat resistance make Kevlar fiber an ideal construction material for certain types of rope. Ropes are essential industrial and commercial utilities and have been since before recorded history.
The low helix angle braiding technology minimizes the downhole breaking elongation of the Kevlar rope. The combination of the pre-tightening technology and the corrosion-resistant two-color marking technology makes the installation of downhole instruments more convenient and accurate.
The special weaving and reinforcement technology of the Kevlar rope keeps the rope from falling off or fraying, even in harsh sea conditions.
-
FS- Micro Circular Rubber Connector (16 contacts)
The Micro Circular Rubber Connector is designed by Frankstar Technology which provides enhanced water tightness with uniform needle core size and design. Frankstar Rubber Connector is based on the standard circular series, which greatly reduces the installation space. It is suitable for the use of compact and portable equipment, instruments, and systems. The micro circular series has a range of 2-16 contacts, rated voltage of 300V, current of 5-10 A, and working water depth of 7000m. With adv... -
FS- Micro Circular Rubber Connector (12 contacts)
The Micro Circular Rubber Connector is designed by Frankstar Technology which provides enhanced water tightness with uniform needle core size and design. Frankstar Rubber Connector is based on the standard circular series, which greatly reduces the installation space. It is suitable for the use of compact and portable equipment, instruments, and systems. The micro circular series has a range of 2-16 contacts, rated voltage of 300V, current of 5-10 A, and working water depth of 7000m. With adv... -
FS- Micro Circular Rubber Connector (10 contacts)
The Micro Circular Rubber Connector is designed by Frankstar Technology which provides enhanced water tightness with uniform needle core size and design. Frankstar Rubber Connector is based on the standard circular series, which greatly reduces the installation space. It is suitable for the use of compact and portable equipment, instruments, and systems. The micro circular series has a range of 2-16 contacts, rated voltage of 300V, current of 5-10 A, and working water depth of 7000m. With adv... -
FS- Micro Circular Rubber Connector (8 contacts)
The Micro Circular Rubber Connector is designed by Frankstar Technology which provides enhanced water tightness with uniform needle core size and design. Frankstar Rubber Connector is based on the standard circular series, which greatly reduces the installation space. It is suitable for the use of compact and portable equipment, instruments, and systems. The micro circular series has a range of 2-16 contacts, rated voltage of 300V, current of 5-10 A, and working water depth of 7000m. With adv... -
FS- Micro Circular Rubber Connector (6 contacts)
The Micro Circular Rubber Connector is designed by Frankstar Technology which provides enhanced water tightness with uniform needle core size and design. Frankstar Rubber Connector is based on the standard circular series, which greatly reduces the installation space. It is suitable for the use of compact and portable equipment, instruments, and systems. The micro circular series has a range of 2-16 contacts, rated voltage of 300V, current of 5-10 A, and working water depth of 7000m. With adv... -
FS- Micro Circular Rubber Connector (5 contacts)
The Micro Circular Rubber Connector is designed by Frankstar Technology which provides enhanced water tightness with uniform needle core size and design. Frankstar Rubber Connector is based on the standard circular series, which greatly reduces the installation space. It is suitable for the use of compact and portable equipment, instruments, and systems. The micro circular series has a range of 2-16 contacts, rated voltage of 300V, current of 5-10 A, and working water depth of 7000m. With adv...
